Wire Maintenance / wire hider for wall

I made these cable covers because I refuse to stare at wires hanging between my TV and soundbar on a piano. This set includes a 9.75 inch and a 6.1 inch cover so you can mix and match to fit your setup. The inside width is 0.75 in (19.05 mm) and the outside width is 1.327 in (33.7 mm). I have an HDMI, power, and Cat7 cable running through mine and it handles them just fine. The outer sleeve slides over the base track and has a built-in stop on one end so gravity doesn’t slowly walk it off the wall. When you install it, make sure that stop is at the top. I stick the base to the wall with removable double-sided tape so I can pull it off later without wrecking the paint. If you want different sizes, tell me in the comments what you need and I can tweak the model and upload another version… in exchange for a 5-star review :) Printing notes • Two lengths: 9.75 in and 6.1 in • 9.75 inch version will print on any printers with at least a 10 in bed (A1, P-series, X-series, D-series, etc.). The