Thingiverse
Wire Shelf Peg Board Hinge
par Ticktok
22
Téléchargements
14
Likes
0
Makes
My work room is made up of a bunch of wire shelves, and I was looking for a way to hang my tools without using up wall space, so I CADed together these hinges in fusion360 and printed them out.
I've uploaded the stl and step files, and also shared the fusion360 link.
https://a360.co/2HsRjwj
I printed them out on my anycubic kossel with a 0.8mm nozzle, at a 0.64mm layer height, which is why they look so rough.
I like printing brackets and things with a 0.8mm nozzle because they print faster and stronger, downside is, they tend to be on the ugly side. If I'd printed this at 0.4mm layer height it would have come out a lot better, but I was being lazy(and also wasn't sure they'd fit the first try.)
The holes are for a 5mm machine screw, and depending on your printers dimensional accuracy, you may or may not need nuts on the back(I didn't, but my kossel is shit for accuracy).
I've uploaded the stl and step files, and also shared the fusion360 link.
https://a360.co/2HsRjwj
I printed them out on my anycubic kossel with a 0.8mm nozzle, at a 0.64mm layer height, which is why they look so rough.
I like printing brackets and things with a 0.8mm nozzle because they print faster and stronger, downside is, they tend to be on the ugly side. If I'd printed this at 0.4mm layer height it would have come out a lot better, but I was being lazy(and also wasn't sure they'd fit the first try.)
The holes are for a 5mm machine screw, and depending on your printers dimensional accuracy, you may or may not need nuts on the back(I didn't, but my kossel is shit for accuracy).
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !