Wire splice mold

For connections that aren't watertight, this mold can help solve that issue. For use with a hot glue gun. Print speed used was for Hyper ABS filament. 320mm/sDensity at 100%Heat 250*bed temp 80* To keep the glue from sticking to the mold I used WD-40 as lubricant. the small rectangular slot on the mold is for the use of a flat tip screwdriver to separate the 2 halves. for different wire gauges increase the wire diameter on the model for:12-14ga 1.57mm14-16ga 1.30mm16-18ga 1.02mm