Thingiverse
Wireable Miniature Braziers
door kdezra
4
Downloads
8
Likes
0
Makes
Braziers with hollow cores for LEDs and wires (a 5mm LED fits perfectly). I originally made these for a Jarlmoot build (Icewind Dale: Rime of the Frostmaiden). The pictured print is `brazerTall_Carved_Pillar_with_Open_Feet.stl`
**Dimensions**
The minimum inner diameter is 5mm. Each are approximately 16mm x 16mm (between 15.7mm and 17mm) and the heights are 35.3 mm (Short), 41 mm (Medium), and 45mm (Tall).
They are large compared to minis, but look good as part of terrain. If you have 3mm LEDs, you can get away with sizing these by x0.6, making the heights about 21.2 mm, 24.6 mm, and 27 mm respectively.
For 1-in:5-ft maps, these are how the measurements would shake out at scale
| Dimension| x1 Scale | x0.6 Scale |
|--------------|----------|------------|
| Short Brazier Height | 6.9 ft | 4.2 ft |
| Med Brazier Height | 8.1 ft | 4.8 ft |
| Tall Brazier Height | 8.9 ft | 5.3 ft |
| Brazier Width | 3.1 ft | 1.9 ft |
**Credits**
The carved p
**Dimensions**
The minimum inner diameter is 5mm. Each are approximately 16mm x 16mm (between 15.7mm and 17mm) and the heights are 35.3 mm (Short), 41 mm (Medium), and 45mm (Tall).
They are large compared to minis, but look good as part of terrain. If you have 3mm LEDs, you can get away with sizing these by x0.6, making the heights about 21.2 mm, 24.6 mm, and 27 mm respectively.
For 1-in:5-ft maps, these are how the measurements would shake out at scale
| Dimension| x1 Scale | x0.6 Scale |
|--------------|----------|------------|
| Short Brazier Height | 6.9 ft | 4.2 ft |
| Med Brazier Height | 8.1 ft | 4.8 ft |
| Tall Brazier Height | 8.9 ft | 5.3 ft |
| Brazier Width | 3.1 ft | 1.9 ft |
**Credits**
The carved p
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
