Witch Girl

Project: witch GirlPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 100x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite Temp Purple-Pink-Translucent (Cold) Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 3.3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #19 (0.88mm) swap to Temp Purple-Pink-Translucent (Cold) At layer #21 (0.96mm) swap to Red At layer #27 (1.2mm) swap to Jade White for the rest.