Witcher Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 1.6mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic White Transmission Distance: 5 PLA BambuLab Basic Grey Transmission Distance: 1This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Beige At layer #12 (1.04mm) swap to Brown At layer #13 (1.12mm) swap to White At layer #18 (1.52mm) swap to Grey for the rest.