WLANThermo Mini V3 Print-Case

WLANThermo Mini V3 Print-Case (86 x 86 x 32 MM)

10x M2x4 mm screws are required to secure the boards
4x M3x25 mm screws are required to screw to case
2x 40x5x2 mm magnets can be glued into the bottom

Corner elements are required 4x.

Side panels (DXF) are intended for laser cutting.
But can also be printed in simplified form.

For more informations about WLANThermo Mini see:
https://wlanthermo.de/pages/modelluebersicht/
https://forum.wlanthermo.de/