Thingiverse
WLED Corner lamp cover
por blazoncek
5
Descargas
2
Likes
0
Makes
A cover for digital individually addressable LED corner lamp (WLED).
Built using a custom foot (15mm x 15mm rods welded together) and standard aluminum LED channel (14mm x 7mm).
The channel is attached to the foot with two M4 screws.
You will need to weld (or create by other means) a foot from 15mm x 15mm x 150mm rods and a plate with M4 threads to secure aluminum channel to it.
WLED controller can be hidden within cover and attached to the walls or aluminum channel by double sided tape.
Button and power plug (5.5mm x 2.5mm) are standard 12mm.
Added holes for SR602 PIR sensor and IR sensor. Both can be glued to the case.
Built using a custom foot (15mm x 15mm rods welded together) and standard aluminum LED channel (14mm x 7mm).
The channel is attached to the foot with two M4 screws.
You will need to weld (or create by other means) a foot from 15mm x 15mm x 150mm rods and a plate with M4 threads to secure aluminum channel to it.
WLED controller can be hidden within cover and attached to the walls or aluminum channel by double sided tape.
Button and power plug (5.5mm x 2.5mm) are standard 12mm.
Added holes for SR602 PIR sensor and IR sensor. Both can be glued to the case.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
