wolf hueforge

Project: wolf.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 259.7x463.3mm in sizeYou may print at higher layer heights below the Base Thickness of 0.72mmThe Max allowed Thickness is 2.96mm and the Actual Thickness is 2.16mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5 #e11021 PLA Copymaster 3D Red Transmission Distance: 4 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4This print uses 4 unique filamentsSwap Instructions: Start with PolyLite Black At layer #11 (1.04mm) swap to BambuLab Matte Ivory White At layer #12 (1.12mm) swap to Copymaster 3D Red At layer #18 (1.6mm) swap to BambuLab Basic Sunflower Yellow At layer #21 (1.84mm) swap to BambuLab Matte Ivory White for the rest. Boost Me