Wolf in the dark forest

Project: Wolf in the dark forest.png Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm  The Model is 200x200mm in size  You may print at higher layer heights below the Base Thickness of 0.52mm  The Max allowed Thickness is 2.28mm and the Actual Thickness is 2.12mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #67777f PLA Kexcelled Gray Blue Transmission Distance: 2.6 #8c9099 PLA PolyLite Grey Transmission Distance: 1 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.92mm) swap to Gray Blue At layer #15 (1.32mm) swap to Grey At layer #19 (1.64mm) swap to White for the rest.