MakerWorld
2D Art
Zum Modell
Wolf through the wall
0
Downloads
3
Likes
0
Makes
Wolf breaking through wall - FOR THE BASE Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in size IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT You may print at higher layer heights below the Base Thickness of 0.88mm The Max allowed Thickness is 3.12mm and the Actual Thickness is 3.04mm Filaments Used: #000000 PLA Sunlu Matte Black Transmission Distance: 0.1 #8b4513 PLA Sunlu Chocolate Transmission Distance: 4.5 #edbb84 PLA Kingroon skin Transmission Distance: 3.5 #ffffff PLA sunlu white Transmission Distance: 6.8 This print uses 4 unique filaments Swap Instructions: Start with Matte Black At layer #15 (1.28mm) swap to Chocolate At layer #23 (1.92mm) swap to skin At layer #29 (2.4mm) swap to white for the rest. at layer 37 height modifier has been placed - keep to white at layer 682 swap to black
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
