Wolfcraft 2625 chuck handgrip

This is a Wolfcraft mod. 2625 chuck handgrip. Allows to handle 0,5-6,5 mm small bits and other tips.

The screws prevent the stem from falling out and prevent it from rotating inside.

The brass tube is removed from an electrical connection plug. The inner diameter is 8 mm, the outer 11,5 mm and the length is 13 mm. It should be inserted in the upper part before gluing both parts.

See Wolfcraft 2625 chuck handgrip refurbished if a tube of these dimensions is not available.

Use PVC pipe adhesive or acetone (if you print in ABS).

If you edit the FreeCad design, cut the stl file on the Z axis to 8,01 mm with Netfabb. Rotate bottom part 180º before printing.

-----------------

Mango para portabrocas Wolfcraft 2625. Permite manejar brocas y otras puntas de 0,5-6,5 mm de diámetro.

Los tornillos evitan que se salga el vástago e impiden que rote en el interior.

El tubo de bronce se obtiene de una ficha de conexión eléctrica. El diámetro interior es de 8 mm, el exterior