Wolverine HueForge 4 Colors

Here's my first Hueforge attempt, it turned out pretty well! It's a Wolverine Hueforge Print that only uses four colors and can be done without AMS you just have to build pauses in and swap out filaments. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200 mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.32 mm and the Actual Depth is 2.4mmFilaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA Polylite Azure Blue Transmission Distance: 3PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions:Start with CharcoalAt layer #9 swap to Blue GrayAt layer #16 swap to SilverAt layer #21 swap to Jade White for the rest.