Wolverine Hueforge Art

Project: Wolverine.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 254x143mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Elegoo Black Transmission Distance: 0.2 PLA Elegoo White Transmission Distance: 5.5 PLA Elegoo Grey Transmission Distance: 2.2 PLA Elegoo Yellow Transmission Distance: 5.6 PLA Elegoo Orange Transmission Distance: 5.6This print uses 5 unique filaments !!!! It is possible to print this hueforge with a single AMS unit just organize your filament swap in away that makes the most sense to you !!!!! Swap Instructions: Start with Black At layer #8 (0.72mm) swap to White At layer #11 (0.96mm) swap to Grey At layer #12 (1.04mm) swap to Black At layer #14 (1.2mm) swap to White At layer #15 (1.28mm) swap to Yellow At layer #18 (1.52mm) swap to Orange At layer #20 (1.68mm) swap to White for the rest.