Wolverine_hueforge

I printed this using Elegoo PLA+ Black, Elegoo PLA+ yellow and Elegoo PLA White. Based on your filament choice the result may vary. In the Hueforge program this is planned using the below filaments:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 150x177.51mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.5mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Pu