WorkSharp Precision Adjust Chisel Adapter

I wanted to sharpen chisels and plane irons on my WorkSharp Precision Adjust. I came across an adapter sold on Etsy that allowed just that. The big clue was holding them at an angle of 45 degrees.This adapter is my own version:you clamp it in the knife clamp of your Precision Adjustthen clamp your chisel or plane iron on the adapteruse the lined to help you position it perpendicular to the top of the adaptersharpen them as you would sharpen your knivesRequired hardware:2 M5x20mm bolts2 M5 butterfly nutsNote that the model has quite 'tight' pockets for the heads of the bolts, since I wanted mine to 'bind' to avoid them spinning free as I tighten the butterfly nuts. This did not really work out though, I might need to find a better way. If your bolts have bigger heads, you can adjust the pockets in the included FreeCAD model.Printing hints:I printed in PLA, PETG should be fine tooPrint the adapter on its side, that way no support is needed.Print the 'clamp' piece