Wrist rest for Nomad [E] keyboard

A channeled wrist/palm rest for the Work Louder Nomad [E] keyboard. This wrist rest is designed specifically for the Work Louder Nomad [E] keyboard, and as large as possible for a 256x256 mm print bed as one continuous piece. There are three channels running the width of the model, because one solid piece was not interesting enough.342.5mm wide, 8mm short of the full width of the Nomad [E] keyboard, but aligns with the keys on the far right and the display frame on the far left.70mm deep17.3mm tallBottom has 9 spots for adhesive non-slip feet, up to 18mm in diameter. Print with supports.Enclosed Bambu Lab printers must have the auxiliary and chamber fans turned off to prevent warping and bed separation in the back-left corner. The 3MF file is set up with:Supports for the three channels running widthwise through the model. You will need a long flathead screwdriver or similar to break these away.Variable layer heightDiagonal standing orientation to maximize print bed volumePrinted with P