ws2811 Fence arch

This arch holds 20 pixels. 1 full arch is about 15 inches wide and about 11 inches tall. Or you connect them together. I pre build, 1 single connector a set of arches then a double connector, set of arches, double connector, etc. I have found it's easy to connect 5 arches together. Just remember 1 single at the beginning and 1 at the end this way if anything goes wrong with the lights you can take the section down and that is a 100 count strand.

The Hardware;
#6-32 x 3/4 inch machine screws ( to connect arches )
#6-32 x 1 1/2 inch machine screws (to connect arches to single or double connector)
#6 washer (I used washers on arches and connectors)
1/4-20 x 2 1/2 carriage bolts (to connect the connectors to the top rail of chain link fence)
1/4-20 7/16 nut for carriage bolt

If your machine is tuned in you may not need to do infill on the single and double connectors. But if not please use infill, you may get sagging in the roof that will need to be taken care of so parts