X-23 Marvel Hueforge

Project: X-23 v2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.88mm and the Actual Thickness is 2.8mmFilaments Used: (* = Owned) #000000 * PLA BambuLab Basic Black Transmission Distance: 0.1 #0086d6 * PLA BambuLab Basic Cyan Transmission Distance: 2.4 #ffffff * PLA BambuLab Basic Jade White Transmission Distance: 5.8 #c00d1e * PLA BambuLab Basic Red Transmission Distance: 3.7 #fce300 * PLA BambuLab Basic Yellow Transmission Distance: 5.2This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Cyan At layer #10 (0.88mm) swap to Jade White At layer #14 (1.2mm) swap to Black At layer #15 (1.28mm) swap to Red At layer #18 (1.52mm) swap to Yellow At layer #19 (1.6mm) swap to Jade White At layer #24 (2mm) swap to Yellow At layer #27 (2.24mm) swap to Jade White for the rest. For Sing