X-Axis Drill Guide for Idler Removal/Conversion

DISCLAIMER: THIS MODIFICATION CAN/WILL VOID YOUR WARRANTY. PERFORM THIS MODIFCATION AT YOUR OWN RISK.BackgroundThis is a drill jig for locating holes in order to remove the pin holding the smooth idler pulley on the X-Axis in order to change out for a toothed pulley.Bill Of Materials(Recommended) QTY: 1 - X-Axis Carbon AssemblyQTY: 2 - Printed Drill GuideQTY: 2 - Printed Shim Tool0.2mm nozzle at 0.1mm first layer and 0.05mm remaining layers with maximized wall countQTY: 1 - 5mm (0.201" or #7) Drill BitQYY: 1 - 3mm (0.125") Drill BitQTY: 1 - 2mm hex key (included with printer) or something similar to use as a punch to remove the pin and a rubber malletQTY: 2 - Genuine Gates 20T, 6mm Belt Width, 5mm Bore, toothed idlerM-IDLER-T-GT2-P20-6-A-P5-H100https://www.filastruder.com/collections/gates/products/gates-2gt-idler?variant=15443755728967https://e3d-online.com/products/gates-belts-pulleys-and-idlers?variant=41205372289083QTY: 4 - 5mm ID x 7mm OD x 0.2mm TH shimshttps://www.amazon