Thingiverse
X axis Levelling block
door TechnologyOutlet
8
Downloads
8
Likes
0
Makes
This is simply a block to help set the height of the X axis.
We normally print 2 so you can put one at each size.
Turn off the machine and rest the X axis on the blocks at each side by adjusting the Z axis screw. Then turn the machine back on and raise the Z axis and the X axis gantry should stay at the same height on each side.
It works with most Copymaster or CR10S style printers with dual Z axis.
We normally print 2 so you can put one at each size.
Turn off the machine and rest the X axis on the blocks at each side by adjusting the Z axis screw. Then turn the machine back on and raise the Z axis and the X axis gantry should stay at the same height on each side.
It works with most Copymaster or CR10S style printers with dual Z axis.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!