X carriage M12 inductive sensor mount

This is designed to hold a M12x1 inductive sensor onto the X carriage of my heavily modified ANET.

The only additional part you need is a M3 screw and but to go from back to front of the mount through the X carriage.

There`s a cut out at the bottom for a 2x2 neo pixel board ( future upgrade ), you can eliminate that in tinkercad by ungrouping everything and delete the bottom hole objects.
The board I'm using: https://www.aliexpress.com/item/1005003764986831.html

It will fit the common available metal upgrade X carriages for Anet (Prusa I3): https://www.aliexpress.com/item/4000919328161.html

Remember to adjust probe offsets once installed (M851).

Printing at .12 layer height increases the thread resolution, you can try .2 layer height but you might have failed threads and a normal M12 tap won`t fix them as the pitch is 1 instead of 1.25.

If you need to adjust it, here`s the link to tinkercad design: https://www.tinkercad.com/things/9zluiAkpZCV-fantastic-migelo/edit?s