X-Class Pipe Quad

Large scale drone frames are quite expensive so my decision was to make an affordable yet sturdy plastic pipe frame.

You will need to print:
- 4 Motor Pipe Mounts
- 4 Motor Pipe Mount Tops
- 1 Motor Pipe Mount Corner Adjuster
- 1 PipePod
- 4 PipePod Clamps

You will need to buy:
- 2m 32mm plastic toilet pipe
- 1pc 32mm 4-Way pipe cornering
- 4pcs 32mm pipe cap (optional)
- 32pcs drill screws for attaching the arms to the 4-Way and attaching the motor mount on the arm (3mm x 12mm is just fine)
- 16pcs M3 10mm bolts for attachint the motor mount top on the motor mount (8mm long if you are brave and 10mm if you want to have a nut on the other side)
- 8pcs M3 8mm bolts for attaching the pod on the pipes
- 24pcs M3 Nyloc nuts


The frame parts I used these ones, but you can check what your hardware store has to offer:
- 32mm piping https://www.biltema.fi/rakentaminen/lvi/putkistot/viemariputket/pp-putki-2000018289
- 32mm pipe cap https://www.aliexpress.com/item/329565