X-Frame Desk Organizer

This project is a modern geometric 3D design object that combines organic curves with clean, structured lines. The central crossed / V-shaped structure forms the visual focal point, giving the model a dynamic and sculptural appearance. The model is specifically optimized for FDM 3D printing. Critical overhangs and transitions are carefully considered, allowing the use of tree supports for reliable printing while keeping post-processing minimal. The solid base ensures stability during printing and in the final printed object. The design is suitable for decorative, display, or organizer-style applications, depending on scale and material choice. It prints well in PLA and similar filaments and is compatible with standard 0.4 mm nozzles. This model is intended for users who appreciate clean geometry, modern aesthetics, and print-focused design optimization. Recommended Print Settings The following settings were used and optimized during development to ensure clean results and easy support removal: General Layer height: 0.16 mm Initial layer height: 0.20 mm Nozzle: 0.4 mm Material: PLA Brim: 6–8 mm (recommended) Speed Outer wall speed: 35 mm/s Inner wall speed: 55 mm/s Sparse infill speed: ~90 mm/s Internal solid infill speed: ~70 mm/s Top surface speed: ~28 mm/s Gap infill speed: ~50 mm/s Support speed: ~45 mm/s Support interface speed: ~30 mm/s Supports Support type: Tree (auto) Support placement: Everywhere Threshold angle: 25° Remove small overhangs: Enabled Don’t support bridges: Enabled Z Distances Top Z distance: 0.20 mm Bottom Z distance: 0.18 mm Interface Top interface layers: 1 Bottom interface layers: Same as top Top interface spacing: 0.30 mm Bottom interface spacing: 0.50 mm Support / object XY distance: 0.35 mm Tree Support Settings Tip diameter: 0.8 mm Branch distance: 1.0 mm Branch density: 30 % Tree branch diameter: 1.8 mm Branch diameter (double walls): 2.5 mm Tree branch angle: 40° Preferred branch angle: 25° Notes These settings prioritize: reliable p