x tool d1 motorized z axis

Heres the motorized z axis for the xtool d1 non pro laser. It can be adapted to fit the pro version too with a slightly different dovetail design. I used a standard skateboard bearing for the 22mm bearing and I put two different sizes of the main body. The rods come stock size of 150mm but it was a bit too tall for my enclosure so i shortened it to 143mm and cut the length of the two 8mm guide rods to fit as well as the 8mm screw. Youll aslo need the 8mm screw nut round, and a stepper motor dual shaft nema. I bought a cheap one on ebay but had to put the wire on the end of it to plug the stepper wire into. I have the wiring schamatics if anyone needs them for the stepper.

https://www.ebay.com/itm/264804021929?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Gr2HZoXdRAW&sssrc=2047675&ssuid=hkWhTcDdRya&widget_ver=artemis&media=COPY

8mm guide rods
https://a.co/d/1hwhXzV
https://a.co/d/6Ns0dT1
https://a.co/d/j0XLnQ6
https://a.co/d/gwPpIJ3
I used just a cheap button switch 6x