X Wing in hyperspace

Update 05/12/2023I made a photo frame for the X-Wing, you can find it here.https://makerworld.com/en/models/83368#profileId-88959 Update 04/05/2023Added a version with a higher base. I printed a fantastic model of the Millenium Falcon that you can find here https://makerworld.com/pt/models/53373#profileId-55147,I then decided to also create my own X-Wing. it's a very simple print that can be print-in-place, it's 4 colors including the x-wing. if you use my 3mf file everything is indicated there and it is easy to print, if you decide not to use my file follow the instructions below Instructions:Print the hueforge print (0mm - 2.08mm) at 100% infill.The X-Wing portion of the print (2.08mm - 144,39mm) should be printed at 10% infill, with 3 wall loops. I used a layer height of 0.16mm.You can achieve this by using a layer height modifier in your slicer to modify layers 2.08mm-144,39mm.You do not need any supports for this print.Swap Instructions for the hueforge base:- Start with Black- At