X1C Glass slider support

I made these brackets to be used in conjunction with the low profile 20mm high glass slider by, "One Maker Show - NOT an AMS Riser” and installed on the Bambu Lab X1C printer. Here is a link to that specific slider: NOT an AMS Riser by One Maker Show MakerWorld: Download Free 3D Models Adding these brackets will give about another 70mm of top opening. You will need 4 M3x8 screws because the screws in the printer will be too short to reuse. I have included the Fusion 360 files in case you want to adjust the screw holes to accommodate a different height slider.