Xbox 360 Controller Battery Holder

SummaryWith this battery holder, you can insert two AA batteries into an Xbox 360 controller. The holder snaps into place and has a small release button on the top. The battery contacts can be made from aluminum foil or empty tea lights. There is an imprint of the batteries' orientation on the back for easy replacement. I created this model by myself and successfully printed it on my Bambu Lab A1 using both PETG and PLA+. Although I spent some time refining the locking mechanism, it may break when using regular PLA. Feel free to leave some feedback, if you print it yourself. Remove SupportsThe tree supports on the bottom should be removable by hand. To release the locking mechanism, you need to cut two small bridges right next to the latch.Battery ContactOption 1 - Aluminum FoilStart with a piece of aluminum foil that is roughly the size of the battery holder. Fold the long side over about 5 mm and continue folding the piece into a small strip. Insert the strip into the slot of the