Xbox 360 controller single button D-pad mod, without shell modifications

I designed this after seeing https://www.thingiverse.com/thing:3905354 which requires cutting into the controller's shell and doing irreversible damage. My controller is nearly a decade old and I don't really want to damage it, as it still works perfectly fine.

So I made this to replace the horrible stock swivel D-pad to 4 individual buttons. maintaining the shell intact required using 10 3D printed parts, but the result is worth it, as I'm not destroying old hardware.

***IMPORTANT: print at 0.15mm resolution with a 0.4mm nozzle and set infill to 100% for all parts except DpadGuide, can be 25% or lower***

**what you'll need to print** :
- 1x DpadFacePlate.stl
- 1x DpadGuide.stl
- 4x ButtonShaft.stl
- 4x EITHER ButtonFace.stl OR ButtonFace_chamfered.stl

The chamfered version of ButtonFace is much nicer to use, but if your printer requires a brim to print tiny parts the chamfer might suffer a bit, so I left the original with sharp edges if that's better for you.

**wh