XY-Clock WiFi / Sinilink Clock - Desktop Version

This version is the "Desktop" version at an angle. See profile for other model.


1x the clock itself
https://s.click.aliexpress.com/e/_c3QOXIxb
https://s.click.aliexpress.com/e/_c3wPSZcp
https://s.click.aliexpress.com/e/_c2vxBwkV

2x M2.5x 10mm, Countersunk
7x M2.5x 8mm, Countersunk
2x M2.5x 5mm, Countersunk

Hex drive
https://s.click.aliexpress.com/e/_c4kBzxfJ

Torx drive
https://s.click.aliexpress.com/e/_c3qnP3i9

The power supply needed is 5V through USB, an "intelligent" USB-C Charger will not work (no trigger), you will some USB-A to USB-C cable.

1x USB C female Socket
https://s.click.aliexpress.com/e/_c4sbJ8PT
https://s.click.aliexpress.com/e/_c3OADhPf

Assembly:
-Power it up and configure it according to XY-Clock Sinilink 
-Solder the USB-connector to the Clock
-Mount the two L feet to the clock, see picuter (needs to be printed twice...) (2x 8mm)
-Mount the Clock with the feet to the base (2x 10mm)
-Mount the top little Clock-holder (1x 8mm)
-Mount the USB-C to the back plate