Y Axis Linear Rail Mounts

Want to do a linear rail conversion on your y-axis? Sure thing!

This uses two 400mm mgn12h linear rails with 3 carriage blocks attached to the bed, set up like the prusa i3 mk3. The ones I bought were for use with M3 hardware, but there will be larger versions for larger hardware up shortly.

After testing this for about a month now, it really isn't a print quality upgrade, its more of a quality of life upgrade for some, and a "because I can" upgrade for others. I usually print about 100mm/s so maybe it'll help with increasing speed, but i was doing that with rods as well.

You'll need:
- 4 of the printed linear rail mounts
- 8 M5x16 bolts, these were extras/spares from the re duplicator build
- 8 of the t-nuts or htnaj5 nuts or whatever they're called; something to insert into the extrusion and tighten down using an m5 bolt.
- 12 M3x? bolts for the carriage blocks (or m4 or m5, whatever yours are) preferably if you can find m4, use that since that's what is already being