Y slider beltless

Part_A

consisting of the motor bracket, the coupling to the slide and the front bearing block. You also need a 5/8 coupling, 1 piece of trapezoidal thread rod Tr8-8; 458.5mm long, an ani-backslash nut to match the threaded rod, an 8mm ball bearing for the front bearing block. 2 screws for fastening the motor, you can use these in front of the original bracket. For the coupling you need 4 screws M3x15 (ani-backslash nut) and 4 screws M3x8 (slide fastening). I used ISO 7380-1 screws, flat head screws with a hexagon socket.
The slide and guides are left. The original screws (motor mount / front belt tensioner) are used for the bearing mounting.


Part_C

Consisting of a motor mount with slide guide holder, according to the original dimensions (172mm axis dimension). A completely new slide and a front bearing block with slide guide holder. Coupling 5/8, trapezoidal thread rod, ani-backslash nut and ball bearing as described in Part_A. Original screws can be used to attach the rear