Y splitter for A1/A1 mini

Y splitter for A1/A1 mini, consisting of a rear part where it attaches to the two ams lite ptfe tubes already inserted.Very convenient for not removing the ams ptfe tube to be able to use the single coil.For the ptfe tube under the splitter part, cut a 50mm piece of ptfe from the original ptfe of the single coil (because it is quite long).ATTENTION, the PTFE that comes from the ams must be inserted into the straight part of the diverter while that of the single coil in the semi-curved one, this is because ams works very easily, while to insert and retract the thread of the single one you will have to do it manually! Always remember to always pull the wire you are not using outside the diverter otherwise the other one will not fit in!Obviously this diverter has been specifically designed to be used without pneumatic restraints, since they are additional weight, so that it is as light as possible but at the same time elegant.Happy Press!