Yet another Lithophane Lamp

This lamp is a remix combination of two designs from Thingiverse with additional customization to make it exactly what I wanted. This was a Christmas present for my mother, and I ended up printing lithophanes of 16 family photos before I ran out of time.

All parts can be printed in their current orientation with no supports required. However, if you're using rainbow filament as I did, you may want to flip over the top piece and add supports so that the color change flows consistently. I used 0.2mm layers for the lamp and 0.12mm layers for the lithophane panels.

I printed the base at 40% infill for the additional weight and stability. If you're using a lighter cord you may not need the additional infill density.

The lithophane panels were generated at http://3dp.rocks/lithophane/ with the following settings:
Outer Curve
Positive Image
Maximum Size: 100mm
Thickness: 3mm
Border: 3mm
Thinnest Layer: 0.8mm
Vectors per Pixel: 4
Base/Stand Depth: 12mm
Curve: 90

Images