YI camera disguise planter

If you've ever wanted to place a camera by the window without anyone noticing, this is the solution. The planter is divided by the wall into two sections - one for camera and one for a plant that makes the camera less noticeable. You can use not only fake plant, but a real one too, without worrying about moisture in the camera compartment. There's a wire tunnel in the bottom, so nobody will see the cable. It's quite a large and prints long, however the camera needs to be elevated, so you can put the planter on the windowsill and the lens is still above the plastic frame of the window.I recommend using PET-G, because PLA can lose it's shape in the sun. If you use the black filament, the camera will be less visible.I recommend printing using supports, as the cable guide and hole for the camera may not be perfect without them. If you have AMS, you may use PLA as interface layer for easy removal of supports (turn off the purge tower, increase flushing volumes etc. - there a