Your Favorite Cup Vortex Impossible Passthrough

This is a 2 piece completely passthrough model with a cup and painted lid and the passthrough with straw. Both pieces have an 8mm brim to provide stability when printing on bed slingers. There are filets on the top for some aesthetic appeal. Try using a translucent color for the lid for a more real to life look (Remember that PETG and PLA don't play well together). The 100% size is 120mm at the straw and 95mm at the lid. The 75% is 90mm at the straw and 73 mm at the lid. Both sizes passthrough easily, but make sure to clean up where the brim was if it sticks at all. The silk version slows down the outer layer from 200mm/s to 60mm/s to really let that silk shine. Running at PLA speeds will cause artifacts especially vertical banding and exaggerated seams. Enable Scarf seams in your Filament Profile if you want to reduce the seams. Make sure to check out my other collections as well as other passthroughs and fidgets. Leave a LIKE if you like the model! Thanks.