Yubikey Case

Just a case to fit on a Yubikey. Tested on the YubiKey 5 series and should fit any with the same form factor, won't fit any of the smaller or Bio keys. It will be almost double the thickness, you may have trouble attaching it to very solid keyrings but most other rings, chains, or loops should work fine. It clicks into place securely using a pair of rings printed on the inside the clip to the key chain hole at the top. It will take some force to remove it once it's on. It has to print on one of the short ends, so a clean bed helps. The profiles include a brim. When I printed mine, some filaments were fine without on the SuperTack plate, but some like glow in the dark or glitter needed the brim. If you have a filament that tends to shrink when it cools, you may want to scale it up a tiny bit, it can be a tight fit. I'd suggest running a single to test it before making a batch. In the example pic, both were printed at 100%, but the glittery rainbow one took some force to put