Z Axis Cable Chain for Anet A8

I designed this Z axis drag chain to work with the X axis chain that was designed by TNS (https://www.thingiverse.com/thing:2105040), and the Electronics Case designed by Lindkj (http://www.thingiverse.com/thing:2294191). The chain links have two options: 16 Links of either the closed chain links designed by sukhoi27 (http://www.thingiverse.com/sukhoi27), or the open chain links closed by zip ties, designed by Starwhooper (http://www.thingiverse.com/thing:1905344).

When printing the Electronics Case Mount rotate it 90° in the Y direction so that the tabs for attaching the chain links are printed stronger and less likely to break off. Use supports from the build plate and extra cooling when bridging.

The Motor Mount should be printed the way it drops onto the build plate using supports. This orientation also prints strong tabs.

You will need to drill 2 holes large enough for M3 screws in the top of your Electronics Case to attach the Electronics Case Mount. Center the mount b