Thingiverse
Z-Follower Ver 2
par blarbles
8
Téléchargements
23
Likes
0
Makes
This was my prototype: http://www.thingiverse.com/thing:9187
Version 2 reduces plastic and print time and cleans up spacing. It works but is by no means long-term tested. My bot does not seem to have any issues with binding at the top like it used to. I am using only one of these things on the right side, the other side still has brass press-fit bearings.
The Z-Axis follower is designed to be inserted into one or both sides of the z-axis ToM where the press-fit bearing would go in-between the top and bottom z-axis pieces.
The goal was to make it fit inside the regular z-axis constraints and require minimal modification to the z-axis (now only 2 screw holes).
Original Sketchup file included for whatever modifications people want to make.
Version 2 reduces plastic and print time and cleans up spacing. It works but is by no means long-term tested. My bot does not seem to have any issues with binding at the top like it used to. I am using only one of these things on the right side, the other side still has brass press-fit bearings.
The Z-Axis follower is designed to be inserted into one or both sides of the z-axis ToM where the press-fit bearing would go in-between the top and bottom z-axis pieces.
The goal was to make it fit inside the regular z-axis constraints and require minimal modification to the z-axis (now only 2 screw holes).
Original Sketchup file included for whatever modifications people want to make.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
