Zebra on the loose!

If you live in Seattle, you understand Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA Overture Matte Black Transmission Distance: 0.1 PLA Elegoo Blue Transmission Distance: 2.7 PLA PolyLite Pro Magenta Transmission Distance: 1 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyTerra Arctic Teal Transmission Distance: 0.5 PLA Overture Matte White Transmission Distance: 3.7This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #11 (0.96mm) swap to Magenta At layer #14 (1.2mm) swap to BambuLab Green At layer #16 (1.36mm) swap to Sunrise Orange At layer #18 (1.52mm) swap to Arctic Teal At layer #20 (1.68mm) swap to White for the rest.