ZenFill Coasters - 6 Versions

Zen inspired infill coasters - tranquil, engaging, functional objects out of plastic and creative misuse of slicer math. All variants are the same object with different slicer settings and filament colors. Slicer settings for creating the various scenes are at the bottom. These were made using Bambu Studio and a Bambu lab AMS. But, AMS is not required - there is an STL versions scaled to print individually and glue together. Note that the “second frame sand pattern” is 0.6mm below the frame and the inner patterns. This allows the concentric sand line pattern to be consistent throughout . 0.6mm hasn't been a problem for any cups/cans/mugs/glasses I tried. If you scale, be aware that scaling the z-height up or down will add/remove height/layers from that. Settings to create the various scenes if you are printing separately and gluing, or recreating in another slicer: Which STL to grab: The “combined” stl has zero clearance and is for use with an MMU/AMS. My designs used “split to objects