ZenGlow 2.0

🏮 Modern Japanese Table Lamp🔧 Required Hardware🔩 4x M3x15 mm socket head cap screws (hex/Allen drive)📌 12x 3x8 mm pins💡 1x Clip-in lamp socket, e.g.: National Artcraft Lighting Cord Set from Walmart🧻 Tissue paper or rice paper (for the shade covering)🔥 1x LED bulb (e.g., flame-effect bulb for cozy atmosphere)🖨️ 3D-Printed Parts🧱 4x Frames🪟 4x Inserts/Screens⚓ 1x Base – or a taller one if preferred🔺 1x Top Part 1🔻 1x Top Part 2💡 Tip: For a fast print, use a 0.3 mm layer height – just like shown in the original photos!🛠️ Assembly Instructions🔩 Prepare the Frames:Use the M3 screws to gently tap threads into the marked holes (indicated by a downward arrow 🔽).👉 Insert the screw slowly with a power drill and then remove it again.🔁 Repeat for all 4 frames.🪟 Install the Inserts:Click one insert into each frame – "Click!"🧻 Attach the Tissue Paper:Cut 4 sheets of tissue paper to match the size of the frames and fix them in place using the pins.✂️ + 📌 = 🎐📦 Assemble