Zenless Zone Zero SEED September Wallpaper

Project: 席德 9月壁纸 横.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.14mmThe Model is 200x112.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.14mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA PolyLite Pro Light Blue Transmission Distance: 1This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #10 (0.86mm) swap to Jade White At layer #20 (1.66mm) swap to Light Blue for the rest. Project: 席德 9月壁纸 竖.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.14mmThe Model is 92.27x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.14mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA PolyLite Pro Light Blue Transm