Thingiverse

Zero Fs Coin

by 3dFcubed

133 Downloads

96 Likes

1 Makes

This coin is two sided. Says the same thing on both sides. Print it vertically with supports touching the bed. My prints came out a bit better when I did a few (actually 6) at a time so that they had more time to cool between layers. This is also a large coin at 50mm, I had my slicer take it down to 28mm. Print this out and hand it out so that they know there were zero F***ks given.

coin coins coworker EDC fun gag gift joke MakerBotDigitizer work zero

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Zero Fs Coin?

Any FDM printer should handle Zero Fs Coin just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Zero Fs Coin need supports when printing?

Yes, Zero Fs Coin will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Zero Fs Coin available in?

Zero Fs Coin is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Zero Fs Coin free to download?

Yes, Zero Fs Coin is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Zero Fs Coin

Similar Models

Add to Collection