Zerotech Dobby Lipo Battery Setup

This thing is a clip to fasten a 950mAh Turnigy nano-tech battery to the Zerotech Dobby.

As well as the battery a JST connector soldered to a couple of 2.8mm female spade terminals is all that is required. The spade terminals fit neatly and tightly between the outer battery connectors on the Dobby (make sure that the positive is on the left!). The battery then fits perfectly into the battery bay. Mount the 3D printed battery clip so that it traps both the balance and discharge leads between clip and battery so that they can't get snagged by the propellers.

Using this system means that both cheap lipo batteries and the Zerotech Dobby batteries can be used inter-changeably.