Zeus VTX Pro LED Indicators

These three diffusers are designed to slot under the VTX to make the indicator LEDs more visible. The pieces need to be inserted in the correct order: left, right and center. Otherwise they won't fit due to the placement of the LEDs. If you want, you can paint the edges of the middle piece black to make sure the adjacent LEDs can't shine through it.

To hold the pieces in place, put a small strip of tape on the underside of the VTX and slide the pieces under it. Then screwing the VTX down should hold them firmly.

Only fits the HGLRC Zeus VTX Pro.

Print with transparent filament and 100% infill. Cooling is recommended. Due to the small size, use 0.12mm layer height. Printing time should be around 3 minutes.