Zipper - quick fix

by G__W__ · Other Tools

42 Downloads

10 Likes

12 Makes

SummaryI designed this for a quick fix.Print without support, place a paper clip and snap the two zipper pull parts. You might need to hammer it a bit since it's a tight fit. No glue was required, but some superglue might be a more permanent fix.If you print the base, you will have to fit the paper clip to the ring of the base first. Also, make sure to clip off any residual part on the original zipper for a smooth surface to glue on with super glue.Print SettingsPrinter Brand: Creality Printer: CR-10 Rafts: No Supports: No Infill: 100 Filament: unbranded PLA

zipper zip broken

GW also publishes on

52 additional models across 1 more platforms

MakerOnline

52 models

♥ 8,825 ↓ 25,662

Frequently Asked Questions

Which 3D printer is suitable for Zipper - quick fix ?

Any FDM printer should handle Zipper - quick fix just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Zipper - quick fix need supports when printing?

No supports needed for Zipper - quick fix — it's designed to print clean off the bed.

What file format is Zipper - quick fix available in?

Zipper - quick fix is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Zipper - quick fix free to download?

Yes, Zipper - quick fix is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Zipper - quick fix

Similar Models

Add to Collection