Zlin 242L

Hey, here's a 1/30 scale Zlin 242L, ready to print.

[Edit v.1.1. Updated cowling to more accurate profile w/ stall rails, improved prop shape, thinned landing gear legs, and changed recommended print settings for rear fuselage.]


Printer settings for Cura Ender 3 profile set to “Fine” for all settings with the changes below made:

All components 0.1 layer height except:

Ailerons, rear fuselage, horizontal stab 0.15

Nose wheel, main wheels, nose oleo, landing legs 0.06

Wall thickness 2 for forward fuselage, cowling (use 3 walls)

Wall thickness for Rear fuselage single wall to keep tail light. With previous settings coins in cowling would be insufficient to keep the nose down.

Infill 10% for all components except:

Cowl - 20% infill for increased nose weight

Rear fuselage - 5% infill

Prop blades - 0% infill

Brims for all small components for stability, supports everywhere where recommended by Cura.

Print speeds should be the default “Fine” setti