Thingiverse

ZMR FPV Camera 20* Mount

by LoveWaffle

190 Downloads

115 Likes

5 Makes

This is a 20* mount for Sony 700TVL cameras, replacing the original ZMR fiberglass camera mount. It should fit if you snip off the outside mounting brackets on the camera. The screw holes should fit M2 screws, and you might consider using double sided tape for extra cushion.

If you don't have access to a 3d printer, or want to help me out you can get this file printed on Shapeways here - http://shpws.me/JVl4

20 degree 700TVL angle bracket camera mount fpv fpv camera fpv camera mount mount sony fpv camera zmr ZMR250 ZMR 250

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

ZMR FPV Camera 20* Mount

Similar Models

Add to Collection