Thingiverse
ZMR220x evolution ZMR250
di Vladimir_G
7
Download
6
Likes
0
Makes
Item name: Spacer ZMR220x (SBS plastic material modifications to the ZMR250 )
The weight of the new version of simpletons just 21g. In simpleton provided for mounting camera with adjustable angle PZ0420M 15-55 degrees, PLUS OWL and Swift RunCam (5 and 25 degrees ). The hole for the FPV transmitter is drilled in place. (For installation need to cut the plate zmr250 just cut 2 each of 3 plates.) Also there is a mounting for the controller managing the flight operations centre distance standard of 30.5 mm. Rays from ZMR250 - one of the holes when installation need to drill out 0.5 mm. the weight of the entire frame ZMR220x with spacer 98g+21g=119g.
Material: SBS/PETG plastic
Weight: 21g
Layer Height: 0,1
Infill 20% + support
Video guide: https://www.youtube.com/watch?v=KmobUG88VUo
3D printer - 200$ - Micromake D1 - official dealer: https://goo.gl/fuHWJ7
The weight of the new version of simpletons just 21g. In simpleton provided for mounting camera with adjustable angle PZ0420M 15-55 degrees, PLUS OWL and Swift RunCam (5 and 25 degrees ). The hole for the FPV transmitter is drilled in place. (For installation need to cut the plate zmr250 just cut 2 each of 3 plates.) Also there is a mounting for the controller managing the flight operations centre distance standard of 30.5 mm. Rays from ZMR250 - one of the holes when installation need to drill out 0.5 mm. the weight of the entire frame ZMR220x with spacer 98g+21g=119g.
Material: SBS/PETG plastic
Weight: 21g
Layer Height: 0,1
Infill 20% + support
Video guide: https://www.youtube.com/watch?v=KmobUG88VUo
3D printer - 200$ - Micromake D1 - official dealer: https://goo.gl/fuHWJ7
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!